Click on image below to get the Full PDF Specs for all the options available in the
PJ Trailer Company Low-Pro Flatdeck with Duals category
PJ Trailers delivers trailers that have multiuse capabilities for the demanding jobs of hauling, transport and support for a wide range of businesses. Take a look at the PJ Trailers Low-Pro Flatdeck with Duals Trailer and some of the many options available.
standard features include: | |
25,000 lb. G.V.W.R. | Lockable Front Toolbox w/ Chain Holder |
10,000 lb. x 2 G.A.W.R. | 8’ Ramps w/ Holders |
GN 2 5/16” Ball Bulldog Coupler 25,000 lb | 12” x 19 lb. I-Beam Main Frame, Riser & Neck |
Safety Chains | Frame Bridge Standard on 30’ and up |
1 - Drop Leg Jack (10,000 lb.) | 3” Channel Crossmembers 16” on Center |
2 - Dexter Oil Bath Brake Axles (12,000 lb.) | 2 x 8 x 1/8” Square Tubing Outer Deck Frame |
5 Leaf Slipper Spring Suspension | 2” Treated Pine Lumber Deck |
8 Dual Wheels, 16” Grey, 8 on 6.5” Bolt Pattern | 102” Wide Deck |
8 - 16” 235/80R16 Radial Tires (3,090 lb) | DOT Approved Flushmount Lifetime LED Lights |
Rubrail w/Stake Pockets | Amber Side Turn Flashers |
Electric Breakaway Kit w/ Charger | All-Weather Wiring Harness (7-way RV) |
DOT Reflective Tape | Sand Blasted, Acid Washed, Powder Coated |
Monster Steps on Both Sides | 5 year Dexter Axle Warranty |
OPTIONS INCLUDE: | |
Coupler Options | Axle Options |
Tail Options | Color Options |
ALSO: | |
Add BlackWood Pro to Dovetail and Ramps | Plate for Winch |
Add BlackWood Pro to Dovetail | Under Frame Tie Down Flat |
Blackwood Pro Full Deck | 22 lb. I-Beam Main Frame & Neck |
Blackwood Pro Outer Deck | 12”oc Crossmembers |
1 Extra Pair Flushmount D-Rings on Steel Floor | Rough Oak Floor |
1 Pair D-Rings | Receiver Hitch |
Add 7-Way RV Plug to Rear Bumper | 4” Ratchets every 4ft w/ Slide Track |
HD 25k Jost 2x Jacks | 6” Axle Spread (Longer Equalizer) |
2 Hydraulic Monster Jacks™ | 72” Axle Spread |
Add LED Reverse Lights | 11ga (1/8”) DP Steel Floor w/4 D-Rings & 12”oc |
No Ramps No Ramp Pockets | Frame Bridging |
1 Pair Weld-On Strap Ratchets | Diamond Plate Ramp Bottoms |
1 Side-mount Toolbox 45”x14” | Torque Tube |
1 Side-mount Toolbox 72”x14” | Bulldog 2-speed Jacks (12,000 lb.) |
2 Extra Side Marker Lights, 1 Per Side | Ramp Support Arms |
Call Today for the pricing of your PJ Trailer Flatdeck from Tucson Trailer Company |
Copyright © Tucson Trailer Company.